Lotus Specialist Harrogate

This area is for non-members of the club for asking questions, saying hello and general chat. Strictly no commercial advertising.
Post Reply
minisweeper
Visitor
Posts: 1
Joined: Sun Jan 12, 2014 9:50 pm
Car Details: '06 Exige S2
Contact:

Hi Guys,

Relatively new '06 Exige S2 owner here - not had chance to make it to any of the meets yet but hopefully will do soon!

I've got an issue with my speedo/ABS (basically neither work) and I've had a garage look at it but despite their best efforts they don't seem to be able to track the issue down. I've had a similar problem before and had both rear wheel bearings replaced which solved it but somehow it's come back. n/s/r bearing has been replaced again to no avail.

Their suggestion is to get it to a Lotus specialist who can plug in to the ABS controller which should give some more clues than a standard OBD reader does on the ECU - so does anyone know of anywhere around Harrogate who can do this? Foulds seem to get good reviews but they're a bit of a trek, likewise Phoenix Motorsports. Pure Lotus are the obvious local candidates but I've had a few fairly unimpressive encounters with them so not particularly inclined to go back there if I can avoid it...

Cheers!
User avatar
Dennis
Visitor
Posts: 4840
Joined: Fri Jan 07, 2005 10:33 pm
Location: Sheffield
Contact:

JCT would be the only people local with real Lotus diagnostics for the ABS, NYLOC members get a discount.

What you could do though is clean up the toothed ABS rings on the hubs/driveshafts with a screw driver (I had an issue with some minor corrosion that 'narrowed' the gaps on a car, main dealer could not diagnose the issue but wanted to replace sensors, I sorted by doing this).

Also clean up the sensors while you are at it (being magnetic they can pick up debris that can confuse things).
Cheers

Den
User avatar
softlips
Visitor
Posts: 4841
Joined: Fri Sep 14, 2007 11:16 pm
Car Details: Currently Lotus less
Location: Wath Upon Dearne, Rotherham
Contact:

The ABS rings sometimes corrode and the pressure underneath them can make them crack. I'd be surprised if this happened on a car at 7 years though.

A decent garage should have checked and cleaned the rings first though.

I did once have a car in which the ABS sensors were so sensitive that fitting a different make of tyres front - rear threw the ABS out. I was doing 45K a year in it so changed tyres regularly and twice when the company fitted a different pair the ABS played up.

Have you spoken to Chris Foulds about Italy. He's quite happy to give advise over the phone as are most of the other specialists.
User avatar
The Scotts
Visitor
Posts: 158
Joined: Fri Jun 26, 2009 5:19 pm
Car Details: Exige s
Location: north yorks
Contact:

Give Ian at lotus Newcastle a call one of his lads lives in ripon so maybe able to sort something out.
User avatar
albutch
Visitor
Posts: 9585
Joined: Sat Aug 14, 2004 2:43 pm
Car Details: Elise S2 111S and Excel SA
Location: Dunrobin
Contact:

softlips wrote: Have you spoken to Chris Foulds about Italy.
Time you switched to an Android phone. :lol
If it is still, take a photo of it. If it moves, take a photo of it.
User avatar
pearman00
Visitor
Posts: 1618
Joined: Wed Sep 29, 2004 3:55 pm
Car Details: S1 Elise
Contact:

Martin and Dennis the op has an S2 and the speed/ABS ring
is part of the wheelbearing and you can't get to it to clean it.
You can put a meter on them to check to see if there ok
JCT would be the best place for you to go.
And suddenly I realised that I was no longer driving the car consciously. I was driving it by a kind of instinct, only I was in a different dimension. Ayrton Senna
User avatar
Dennis
Visitor
Posts: 4840
Joined: Fri Jan 07, 2005 10:33 pm
Location: Sheffield
Contact:

pearman00 wrote:Martin and Dennis the op has an S2 and the speed/ABS ring
is part of the wheelbearing and you can't get to it to clean it.
You can put a meter on them to check to see if there ok
JCT would be the best place for you to go.
Well that is a stupid idea fancy hiding them away so you can't fix it yourself :lol
Cheers

Den
User avatar
softlips
Visitor
Posts: 4841
Joined: Fri Sep 14, 2007 11:16 pm
Car Details: Currently Lotus less
Location: Wath Upon Dearne, Rotherham
Contact:

pearman00 wrote:Martin and Dennis the op has an S2 and the speed/ABS ring
is part of the wheelbearing and you can't get to it to clean it.
You can put a meter on them to check to see if there ok
JCT would be the best place for you to go.
Cheers Tony.
Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest