Page 1 of 1
S2 Harness bar *EDIT* and a few other plastic car bits incS1
Posted: Sun Jan 16, 2011 4:38 pm
by Si_F
Hanger111 Harness bar for an S2 K series elise -
SOLD £50 ono to MartL
I don't have any bolts for this (nicked when my van went). Comes with a spare plastic panel that covers the bulkhead that you'll need to cut to fit it so you can either keep your original or cut this one. I believe the spare plastic panel is the one without the light behind the seats, but is still wrapped up can open if you really want to know.
Rarely make the buckles at the moment, so collection from Ripponden would probably be best.....
EDIT
Just had a look and found a load more plastic car parts -
Painted front grill in mica silver for an S2 -
£5 (well I have two of these I think one is missing 1cm of plastic so someone can have it FOC)
Indicator for an S2, think its the passenger one. Perfect from the front with retaining clip and weather seal but has a small 1/2" crack in the back, just needs some sikaflex -
SOLD £5 to Roadboy
S2 driving lights, no connectors or brackets so Ideal to swap out if you've got a broken one
£15 for the pair
SOLD to PT
Another EDIT
Two genuine MG rover K series filers brand new still sealed
£5 for both
Red leather S1 drivers seat worn in the usual spaces
SOLD £15 to Roadboy ono
Elise S2 Catalytic converter only done about 4k miles been sat in my shed
SOLD £30 to paulsavage
Lambda Sensor for an S2, again only about 4k
£25
Re: S2 Harness bar
Posted: Sun Jan 16, 2011 4:56 pm
by Si_F
moved to the first post as I keep finding more bits and its getting confusing
Re: S2 Harness bar *EDIT* and a few other plastic car bits
Posted: Sun Jan 16, 2011 7:43 pm
by PaulT
I'll have that pair of driving lights off you Simon, as long as they're the larger version, not the teeny tiny ones on early cars (I'm sure the 135R being a later machine had the right ones tho)
I'll see if it's convenient to drop by on my next trip over the pennines and then any bits anyone else buys, I'll swipe them and bring to Buckles if that suits.
Re: S2 Harness bar *EDIT* and a few other plastic car bits
Posted: Sun Jan 16, 2011 9:00 pm
by Si_F
PaulT wrote:I'll have that pair of driving lights off you Simon, as long as they're the larger version, not the teeny tiny ones on early cars (I'm sure the 135R being a later machine had the right ones tho)
I'll see if it's convenient to drop by on my next trip over the pennines and then any bits anyone else buys, I'll swipe them and bring to Buckles if that suits.
large version, couple of stone chips that will polish. Found wiring as well, currently fitted with HIDs but I'll remove those before you get them
Photo of the indicator damage if anyone is interested?

Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Sun Jan 16, 2011 10:36 pm
by PaulT
Them's 'em Simon

Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 10:27 am
by MartL
I'll take your harness bar Simon, if still available.
PT can do the collection, depending on the ability to fit it in his passenger seat!? Failing that... I'll bob across in the bimmer and do the honours.
If you PM me your details, I'll wire you the cash - or I can drop it off in person, if collecting.
Cheers,
Martyn.
Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 12:04 pm
by Si_F
MartL wrote:I'll take your harness bar Simon, if still available.
PT can do the collection, depending on the ability to fit it in his passenger seat!? Failing that... I'll bob across in the bimmer and do the honours.
If you PM me your details, I'll wire you the cash - or I can drop it off in person, if collecting.
Cheers,
Martyn.
Its yours Martyn. PT they should both fit in an elise, but its your call, see photo. Length is 1.15m, I used to fit my snowbaord in my elise at 1.61 m long.
Martyn, the plastic panel is still bubble wrapped also has the S2 speakers in, so a bonus for you.

Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 12:48 pm
by MartL
Cheers Si
I guess it's PT's call - on the other hand, I don't mind having a ride out and retreiving his lights while I'm on, and delivering to the Buckles.
PT?
Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 12:50 pm
by Matt R
These are the worst eBay style selling pics I've ever seen !

Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 12:58 pm
by Si_F
Matt R wrote:These are the worst eBay style selling pics I've ever seen !

Ha, I know what you mean. The last one had my address clearly visible, I don't want more random people breaking into my house!
I might have some more wobble wheels somewhere

Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 4:42 pm
by paulsavage
Si,
I'll have the S2 Cat ( I am assuming its off'ff a rover)
Can either wire cash or paypal or see you at buckles?
I am sure PT/MartL can find room for it?
Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 5:52 pm
by Si_F
paulsavage wrote:Si,
I'll have the S2 Cat ( I am assuming its off'ff a rover)
Can either wire cash or paypal or see you at buckles?
I am sure PT/MartL can find room for it?
Yes its a K series CAT. Might be worth speaking to PT to see if he can fit it in as I'm unlikely to make the buckles. Will drop you a PM with account no.
Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Mon Jan 17, 2011 7:09 pm
by roadboy
I'll take the S2 indicator and S1 seat if that's ok Si.
PM me some bank details and I'll BACS the money and arrange someons to collect.
Cheers
Dan
Re: S2 Harness bar *EDIT* and a few other plastic car bits i
Posted: Tue Jan 18, 2011 9:59 am
by Si_F
roadboy wrote:I'll take the S2 indicator and S1 seat if that's ok Si.
PM me some bank details and I'll BACS the money and arrange someons to collect.
Cheers
Dan
Okay Dan, PM sent.